I just wanted to thank you for your time and patience with this order! Wonderful customer support!

   Norm

"This article introduces the next generation of rust repair by showcasing two of the best anti-rush chemicals; POR-15^® and METAL-READY™.  They put a one-two whammy on rust.  To prove our point, we located the rusties car we could find and performed a complete floor pan replacement.  The key to the repairs is etching the new metal with METAL-READY™ and sealing it with POR-15^® and paint.  With the inside of the fram extension exposed, we treated it with our METAL-READY™ and POR-15^® rust busting formula.  This ensures that rust will not be a problem in the future."

"I decided to use them to test various rustproofing products I had acquired.  After a quick wire brushing to remove loose rust, I sprayed each wheel with a different product, then covered them all with stainless steel wheel paint.  Three years later all the wheels had rust pinholes showing through the finish, except for one treated with POR-15.  Keep in mind also that hardened POR-15^® is impervious to just about anything short of an atom bomb."

"Here's an easy way to clean and add color to an engine. POR-15^® makes brush-on engine paint that dries to a smooth, tough, extremely glossy finish.  Whether painting the entire engine or dressing only the upper end, the POR-15^®engine paint kit is a handy tool.  RestoMotive's Engine Clean does a great job of cutting grease.  Everything is included to do a first-class job of dressing up your engine."

"RestoMotive Laboratories offers a floorpan and trunk restoration kit that allows you to repair rusted metal.   The kit comes with all the simple hand tools and chemicals... to remove rust and neutralize, putty and paint your floor pan."

"By scouting around, we found a product that stops rust permanently.  Begin by cleaning the rusted area with a wire brush or sander to remove dirt and loose flakes of rust.  Then, spray the area with MARINE=CLEAN™ to remove any oil or residue deposits.  Next, apply METAL-READY™ and let it set for 15 to 20 minutes.  Finally, brush on POR-15^®.   After the POR-15^® dries, the metal will be covered with a hard, ceramic-lke finish.  The final finish can be sanded and painted just like normal body panels."

Literally everything you'll need, along with complete instructions, is included.  There is enough in this (Steering Wheel Repair) kit to do quite a few repairs, so you might wind up repairing some friends' steering wheels as well.

You can now rejuvenate your old vinyl with a treatment of POR-GLO™ Clear Coat for Viynl.   RestoMotive Laboratories has come up with this new product that will coat and protect vinyl items for up to a year.  It's perfect for vinyl tops, bumbers or any other vinyl item that you want to protect.

"You always polish the front of the bumper, but what about the back?  Before installing any new or replated bumper, I paint the back with POR-15^® Clear (available from Advanced Rust Protection, Inc.)... It is perfect for preserving the back of the bumper."

"I have used your product before when restoring my Jeep CJ7, and a few months later the vehicle was torched.  The truck was completely destroyed.  Your product came thru unscathed. I was amazed!  I rebuilt my truck.  I used the same chassis that I had put POR-15 on without any touch up/ repair at all. I want to thank you for a very impressive product!"